Removal

SUSPENSION CONTROL: PNEUMATIC TANK WITH TUBE: REMOVAL

REMOVAL
HINT: Before replacement, press the height control OFF switch to stop the vehicle height control operation.

1. REMOVE PNEUMATIC W/TUBE TANK ASSEMBLY






(a) Jack or lift the vehicle up.
(b) Remove the 4 clamps.
(c) Disconnect the height control tube No.1 and the wire harness from the pneumatic w/ tube tank assembly.
(d) Remove the 3 clips and height control tank cover.






(e) Disconnect the connector.






(f) Using SST, disconnect the tube from the pneumatic w/ tube tank assembly.
SST: 09730-00010
HINT: For the removal procedure of the (type 2) tube, refer to PRECAUTION of SUSPENSION CONTROL SYSTEM Service Precautions.





(g) Remove the 3 bolts and the pneumatic w/ tube tank assembly.