Removal

MF2A TRANSFER: BEARING RETAINER OIL SEAL: REMOVAL

REMOVAL

1. REMOVE FRONT WHEEL
2. REMOVE ENGINE UNDER COVER ASSEMBLY (w/ engine under cover assembly)
3. REMOVE NO. 1 ENGINE UNDER COVER
4. REMOVE NO. 2 ENGINE UNDER COVER (w/ No. 2 engine under cover)
5. DRAIN AUTOMATIC TRANSAXLE FLUID Removal

6. REMOVE TRANSFER CASE NO. 1 PLUG Removal

7. REMOVE TRANSFER DRAIN PLUG Removal

8. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH
Removal

9. REMOVE TRANSFER RH BEARING RETAINER OIL SEAL






(a) Using SST(s), remove the transfer RH bearing retainer oil seal.
SST: 09308-00010
NOTE: Do not damage the oil-seal-fitted surface of the case.