Installation

MF2A TRANSFER: EXTENSION HOUSING OIL SEAL: INSTALLATION

INSTALLATION

1. INSTALL TRANSFER EXTENSION HOUSING TYPE T OIL SEAL






(a) Using SST(s), install anew transfer extension housing type T oil seal to he transfer extension housing sub-assembly at the position show in the illustration.
SST: 09325-20010
NOTE: Do not install the oil seal obliquely.

(b) Apply small amount of MP grease to the oil seal lip.
2. INSTALL PROPELLER W/CENTER BEARING SHAFT ASSEMBLY
Installation

3. INSTALL EXHAUST PIPE ASSEMBLY
Installation

4. INSTALL TRANSFER DRAIN PLUG Installation

5. INSTALL TRANSFER CASE NO. 1 PLUG Installation

6. CHECK FOR EXHAUST GAS LEAK