Installation

SUSPENSION: FRONT SUSPENSION LOWER NO. 1 ARM: INSTALLATION

INSTALLATION

1. INSTALL FRONT SUSPENSION LOWER NO. 1 ARM
(a) Install the front lower arm bush stopper.
(b) Install the suspension lower arm No. 1 LH to the engine front support member with the 3 bolts and the nut but do not tighten.






(c) Tighten the 3 bolts in numerical order shown in the illustration.
Torque: 200 Nm (2,040 kgf-cm, 148 ft-lbf)
Torque: 206 Nm (2,100 kgf-cm, 152 ft-lbf)
HINT: Start installing the bolts from the front side of the vehicle.

2. INSTALL TRANSVERSE ENGINE MOUNTING INSULATOR






(a) Install the transverse engine mounting insulator with the 3 nuts.
Torque: 87 Nm (887 kgf-cm, 64 ft-lbf)
3. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE