Removal

SUSPENSION: REAR NO. 1 SUSPENSION ARM (for 2WD): REMOVAL

REMOVAL
NOTICE:
- Press the height control switch to stop the vehicle height control operation before jacking up or lifting up the vehicle with air suspension.
- Press the height control switch to operate the vehicle height control after jacking down or lifting down the vehicle with air suspension.
- Support the rear axle carrier with a jack.

1. REMOVE REAR WHEEL
2. REMOVE STABILIZER BAR REAR Removal

3. REMOVE REAR SUSPENSION ARM ASSEMBLY NO. 1 LH






(a) Remove the bolt and disconnect the rear suspension arm assembly No. 1 (inner side).






(b) Remove the bolt, nut and the rear suspension arm assembly No. 1 (outer side) from the rear axle carrier.
NOTE: When removing the bolt, keep the nut from rotating.