Installation

AXLE: REAR AXLE HUB AND BEARING (for 2WD): INSTALLATION

INSTALLATION

1. INSTALL REAR AXLE HUB & BEARING ASSEMBLY LH






(a) Install the hub & bearing assembly LH with the 4 bolts.
Torque: 75 Nm (765 kgf-cm, 55 ft-lbf)
2. INSPECT BEARING BACKLASH Rear Axle Hub and Bearing

3. INSPECT AXLE HUB DEVIATION Rear Axle Hub and Bearing

4. CONNECT SKID CONTROL SENSOR
(a) Connect the connector.
NOTE: Do not twist the sensor wire when connecting it.

5. INSTALL REAR DISC
6. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH






(a) Install the rear disc brake caliper with the 2 bolts.
Torque: 78 Nm (800 kgf-cm, 58 ft-lbf)






(b) Install the bolt with flexible hose to the shock absorber.
Torque: 19 Nm (192 kgf-cm, 14 ft-lbf)
7. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft-lbf)
8. ADJUST REAR WHEEL ALIGNMENT
(a) Inspect rear wheel alignment Rear Wheel Alignment.
9. ADJUST HEADLIGHT AIM ONLY
Adjustments

10. CHECK ABS SPEED SENSOR SIGNAL
(a) Check ABS speed sensor signal Test Mode Procedure.