Installation

AUDIO / VISUAL: NETWORK GATEWAY ECU:

INSTALLATION

1. INSTALL NETWORK GATEWAY ECU






(a) Install the network gateway ECU with the screw.
(b) Connect the connector.
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

3. INSTALL NO.2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation

5. INSTALL FRONT DOOR SCUFF PLATE RH Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from negative battery terminal. Repair Instruction - Initialization