Installation

NAVIGATION ECU:

INSTALLATION

1. INSTALL NO. 2 DISC PLAYER BRACKET






(a) Install the No. 2 disc player bracket with the 2 screws.
2. INSTALL DISC PLAYER BRACKET






(a) Install the disc player bracket with the 2 screws.
3. INSTALL NAVIGATION ECU






(a) Install the navigation ECU with the 3 nuts.
(b) Connect each connector.
4. INSTALL SIDE DECK TRIM BOX LH Installation

5. INSTALL SIDE DECK TRIM BOX RH
6. INSTALL REAR FLOOR FINISH PLATE Installation

7. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY Installation

8. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY Installation

9. INSTALL REAR DECK FLOOR BOX Installation

10. INSTALL FRONT DECK FLOOR BOX Installation

11. INSTALL JACK CARRIER ASSEMBLY Installation

12. INSTALL TONNEAU COVER ASSEMBLY
13. INSTALL DECK BOARD SUB-ASSEMBLY Installation

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
15. PERFORM INITIALIZATION
NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal. Repair Instruction - Initialization