Removal

EXTERIOR: REAR BUMPER: REMOVAL

REMOVAL

1. REMOVE BACK DOOR LINK SUB-ASSEMBLY LOWER
2. REMOVE REAR BUMPER PIECE





(a) Using a screwdriver, disengage the claws and remove the hole cover.
HINT: Tape the screwdriver tip before use.

(b) Remove the bolt and back door stay.
(c) Using a screwdriver, disengage the claws and remove the bumper piece.
HINT: Tape the screwdriver tip before use.

3. REMOVE REAR BUMPER COVER LOWER
(a) Remove the 2 clips.
(b) Using a screwdriver, disengage the claws and remove the cover.
HINT: Tape the screwdriver tip before use.

4. REMOVE REAR BUMPER COVER





(a) Put protective tape under the quarter panel and over fender.
(b) Remove the 7 bolts, 4 screws and clip.
(c) Using a screwdriver, disengage the 10 claws and remove the bumper cover.
HINT: Tape the screwdriver tip before use.