Disassembly

SEAT: REAR SEAT ASSEMBLY (for Rear No. 2 Seat): DISASSEMBLY

DISASSEMBLY
HINT: On the RH side, use the same procedure as on the LH side.

1. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY LH





(a) Disengage the claws, remove the 2 screws and the reclining cover LH.





(b) Remove the screw cover, screw and the release handle.





(c) Disengage the claws, remove the 2 screws and the reclining cover RH.
(d) Open the fastener of the seatback cover, remove the seatback protector.





(e) Remove the headrest supports.
(f) Remove the seatback cover together with the pad.
(g) Cut the hog rings and remove the seatback cover.
2. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH
(a) Insert a screwdriver between the seat cushion cover and seat cushion under cover.
NOTE:
Tape the screwdriver tip before use.

(b) Pry the seat cushion cover hem to disengage it.
(c) Cut the hog rings and remove the seat cushion cover.
3. REMOVE REAR SEAT BELT INNER
(a) Remove the nut and the seat beat inner.
(b) Remove the seat belt inner No. 2 (rear No. 2 seat RH).
4. REMOVE NO. 1 SEAT CUSHION FRAME SUB-ASSEMBLY
(a) Remove the 4 screws and the seat cushion under cover.
(b) Remove the nut and the stopper band.
(c) Remove the 2 bolts, 2 springs and the seat leg.