Reassembly

BRAKE: REAR BRAKE: REASSEMBLY

REASSEMBLY

1. INSTALL REAR DISC
(a) Align the matchmarks and install the rear disc.
2. INSPECT DISC RUNOUT Rear Brake
3. TEMPORARILY TIGHTEN REAR DISC BRAKE BLEEDER PLUG
(a) Temporarily tighten the bleeder plug to the disc brake cylinder assembly rear.
(b) Install the bleeder plug cap on the bleeder plug.
4. INSTALL PISTON SEAL
(a) Apply the lithium soap base glycol grease to a new piston seal.
(b) Install the piston seal on the disc brake cylinder assembly rear.
5. INSTALL REAR DISC BRAKE PISTON
(a) Apply the lithium soap base glycol grease to a disc brake piston.
(b) Install the disc brake piston on the disc brake cylinder assembly rear.
NOTE:
Do not screw the disc brake piston forcedly in the disc brake cylinder assembly rear.

6. INSTALL CYLINDER BOOT
(a) Apply the lithium soap base glycol grease to a new cylinder boot.
(b) Install the cylinder boot on the disc brake cylinder
HINT: Install the cylinder boot securely on the grease of the disc brake cylinder assembly and piston.