Removal

2UZ-FE COOLING: RADIATOR: REMOVAL

REMOVAL

1. DRAIN ENGINE COOLANT Service and Repair
2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
(a) Remove the 4 bolts and engine under cover.
3. REMOVE RADIATOR SUPPORT SEAL UPPER
(a) Remove the 11 clips and radiator support upper.
4. REMOVE RADIATOR RESERVE TANK ASSEMBLY





(a) Disconnect the reserve tank hose from the radiator.
(b) Remove the 3 bolts and reserve tank.
5. SEPARATE FAN SHROUD





(a) Disconnect the radiator hose No. 1 from the radiator.
(b) Disconnect the oil cooler inlet hose from the radiator. (A/T TRANSMISSION)
(c) Disconnect the oil cooler outlet hose from the radiator. (A/T TRANSMISSION)
(d) Disconnect the radiator hose No. 2 from the radiator.





(e) Remove the 2 bolts, and separate the fan shroud.
HINT: Temporarily put the separated fan shroud at an appropriate location in the engine room.

6. REMOVE RADIATOR ASSEMBLY





(a) Remove the 4 bolts and radiator.
7. REMOVE RADIATOR SUPPORT NO.1
(a) Remove the 1 radiator support No. 1from the radiator.
8. REMOVE RADIATOR SUPPORT NO.2
(a) Remove the 3 radiator support No. 2 from the radiator.
9. REMOVE RADIATOR SUPPORT NO.1 BUSH
(a) Remove the 4 radiator support No. 1 bush from the radiator.