Disassembly

2UZ-FE FUEL: FUEL PUMP: DISASSEMBLY

DISASSEMBLY

1. REMOVE FUEL SENDER GAGE ASSEMBLY





(a) Disconnect the sender gage connector from the No. 1 fuel suction plate.





(b) Unlock the fuel sender gage and remove it.
2. REMOVE FUEL SUB-TANK





(a) Disconnect the fuel pump harness connector from the No. 1 fuel suction plate.





(b) Disconnect the suction filter hose from the fuel sub-tank.





(c) Disconnect the 2 tubes from the tube clamps.





(d) Using a screwdriver with the tip wrapped in tape, disengage the 3 claws to separate the No. 2 fuel suction plate.
NOTE:
Do not damage the No. 2 fuel suction plate or fuel sub-tank.

(e) Disconnect the No. 1 fuel suction plate with the fuel filter assembly from the fuel sub-tank.
3. REMOVE FUEL PUMP ASSEMBLY WITH FILTER





(a) Using a screwdriver with the tip wrapped in tape, disengage the 2 claws to separate the fuel suction support.
NOTE:
Do not damage the fuel filter assembly or fuel suction support.

(b) Remove the fuel filter assembly with the fuel pump from the fuel suction support.
4. REMOVE FUEL PUMP





(a) Using a screwdriver with the tip wrapped in tape, disengage the 5 claws to separate the suction filter.
NOTE:
Do not damage the fuel filter assembly or suction filter.

(b) Remove the fuel suction filter with the fuel pump from the fuel filter.





(c) Disconnect the fuel pump harness connector from the fuel pump.





(d) Remove the O-ring from the fuel pump.
5. REMOVE NO. 2 FUEL SUCTION PLATE





(a) Using a screwdriver, remove the 2 E-rings from the No. 2 suction plate.
(b) Remove the No. 2 suction plate and 2 springs from the No. 1 fuel suction plate.