Installation

CELLULAR COMMUNICATION: MAYDAY ECU: INSTALLATION

INSTALLATION
NOTE:
When replacing the Mayday ECU, wire down the ESN and STID numbers that are located on the new Mayday ECU label. Then numbers may be required to register and enroll the ECU with the LEXUS Link Call Center.

1. INSTALL TELEPHONE BRACKET





(a) Install the telephone bracket with the 6 nuts.





(b) Securely engage the wire harness clamp.





(c) Securely engage the 4 claws of the wire harness clamp.
2. INSTALL MOBILEPHONE BRACKET
3. INSTALL MAYDAY WIRE
4. INSTALL MAYDAY BATTERY
5. INSTALL MAYDAY ECU ASSEMBLY
6. INSTALL MOBILEPHONE COVER





(a) Make sure that there is no foreign matter in the shaded area as shown in the illustration.





(b) Fit the 5 claws into the holes of the telephone bracket.
(c) Push in the 12 clips of the mobilephone cover to securely engage the cover.
7. INSTALL NO. 2 SEAT ANCHOR RAIL RH
8. INSTALL NO. 1 SEAT ANCHOR RAIL
9. INSTALL NO. 3 SEAT ANCHOR RAIL
10. INSTALL QUARTER SCUFF PLATE INNER RH Installation
11. INSTALL QUARTER SCUFF PLATE INSIDE LH Installation
12. INSTALL REAR SEAT ASSEMBLY RH
13. INSTALL REAR SEAT ASSEMBLY LH