Installation

BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR: INSTALLATION

INSTALLATION

1. INSTALL YAW RATE AND ACCELERATION SENSOR





(a) Install the yaw rate sensor with 2 bolts.
Torque: 13.3 Nm (136 kgf-cm, 10 ft-lbf)
(b) Connect the yaw rate sensor connector.
2. INSTALL CONSOLE PANEL UPPER
3. INSTALL CONSOLE UPPER PANEL GARNISH NO. 1
4. INSTALL CONSOLE UPPER PANEL GARNISH NO. 2
5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM YAW RATE SENSOR ZERO POINT CALIBRATION
HINT: Calibration

8. CHECK VSC SENSOR SIGNAL
HINT: Test Mode Procedure