Ride Height Sensor: Testing and Inspection

SUSPENSION CONTROL: HEIGHT CONTROL SENSOR: INSPECTION

INSPECTION

1. INSPECT HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR





(a) Remove the height control sensor sub-assembly rear LH or RH.
(b) Connect 3 dry batteries of 1.5 V in series.
(c) Height control sensor sub-assembly rear LH:
Connect terminal 1 (SHB) to the batteries' positive (+) terminal, and terminal 3 (SHG) to the batteries' negative (-) terminal, then apply approximately 4.5 V between terminal 2 (SHRL) and 3 (SHG) in the following conditions.
Standard voltage:






(d) Height control sensor sub-assembly rear RH:
Connect terminal 1 (SHB) to the batteries' positive (+) terminal, and terminal 3 (SHG) to the batteries' negative (-) terminal, then apply approximately 4.5 V between terminal 1 (SHG) and 2 (SHRR) in the following conditions.
Standard voltage: