Installation

SUSPENSION CONTROL: STABILIZER CONTROL ECU (w/ KDSS): INSTALLATION

INSTALLATION

1. INSTALL STABILIZER CONTROL ECU





(a) Install the stabilizer control ECU with the 2 bolts.
Torque: 7.8 Nm (80 kgf-cm, 69 in-lbf)
(b) Connect the connector.
2. INSTALL ROOF SIDE GARNISH INNER LH
HINT: Refer to the procedures from "INSTALL ROOF SIDE GARNISH INNER LH".

3. CONNECT BATTERY NEGATIVE TERMINAL
4. PERFORM ACCELERATION SENSOR ASSEMBLY ZERO POINT CALIBRATION
HINT:
Programming and Relearning.