Installation

SUSPENSION: REAR UPPER CONTROL ARM: INSTALLATION

INSTALLATION

1. INSTALL UPPER CONTROL ARM ASSEMBLY





(a) Install the upper control arm assembly, temporarily tighten the nut, washer and bolt.
HINT: In the case of the air suspensions, install them by referring to the illustration.





(b) Install the rear axle housing, temporarily tighten the nut, washer and bolt.
2. CONNECT HEIGHT CONTROL SENSOR LINK SUB-ASSEMBLY REAR
HINT: Adjustments

3. INSTALL REAR WHEEL
4. STABILIZE SUSPENSION Installation
5. FULLY TIGHTEN UPPER CONTROL ARM ASSEMBLY





(a) Fully tighten the 2 nuts.
Torque: 80 Nm (816 kgf-cm, 59 ft-lbf)
HINT: While fixing the bolt, turn and install the nut.