Installation

SUSPENSION CONTROL: HEIGHT CONTROL SENSOR: INSTALLATION

INSTALLATION

1. INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR LH
(a) Install the height control sensor with the 2 bolts.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
(b) Align the matchmarks on the link and the bracket.
(c) Connect the sensor link with the nut.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(d) Connect the connector to the height control sensor.
2. INSTALL REAR DISC WHEEL
Torque: 112 Nm (1,140 kgf-cm, 83 ft-lbf)
3. MEASURE VEHICLE HEIGHT Service and Repair
4. ADJUST VEHICLE HEIGHT Adjustments