Disassembly

SUSPENSION CONTROL: STABILIZER CONTROL VALVE (w/ KDSS): DISASSEMBLY

DISASSEMBLY

1. REMOVE ACCUMULATOR PRESSURE SENSOR WIRE HARNESS





(a) Disconnect the connector, disengage the clip and remove the accumulator pressure sensor wire harness.
2. REMOVE STABILIZER CONTROL ACCUMULATOR VALVE TUBE SUB-ASSEMBLY





(a) Using a union nut wrench, disconnect the stabilizer control accumulator valve tube.
NOTE:
Do not damage the accumulator valve tube and flare nuts.

(b) Disengage the clip and remove the stabilizer control accumulator valve tube.
3. REMOVE STABILIZER CONTROL ADAPTER SUB-ASSEMBLY





(a) Remove the 2 service valve caps and 2 oil nozzle valves.





(b) Remove the 2 stabilizer control adapter shutter valves.
(c) Remove the 2 O-rings from the stabilizer control adapter shutter valves.





(d) Using a union nut wrench, disconnect the stabilizer control valve to adapter tube.
NOTE:
Do not damage the control valve adapter tube and flare nuts.





(e) Remove the 4 bolts and 2 stabilizer control adapters.
4. REMOVE STABILIZER CONTROL VALVE TO ADAPTER TUBE





(a) Using a union nut wrench, disconnect the stabilizer control valve to adapter tube.
NOTE:
Do not damage the control valve adapter tube and flare nuts.

(b) Remove the bolt and stabilizer control adapter tube.
5. REMOVE STABILIZER CONTROL VALVE





(a) Remove the 3 bolts and stabilizer control valve.
6. REMOVE STABILIZER CONTROL WITH ACCUMULATOR HOUSING ASSEMBLY





(a) Remove the 2 bleeder plug caps and 2 bleeder plugs.





(b) Remove the 3 bolts and stabilizer control with accumulator housing.
7. REMOVE ACCUMULATOR PRESSURE SENSOR





(a) Secure the stabilizer control with accumulator housing in a vise.
(b) Using SST, remove the 2 accumulator pressure sensors.
SST: 09922-10010
NOTE:
Do not damage the stabilizer control with accumulator housing with the SST.