Installation

VF4BM TRANSFER: EXTENSION HOUSING OIL SEAL: INSTALLATION

INSTALLATION

1. INSTALL TRANSFER EXTENSION HOUSING TYPE T OIL SEAL





(a) Coat the lip of a new oil seal with MP grease.
(b) Using SST and a hammer, tap in the oil seal until its surface is flush with the housing upper surface.
SST: 09223-46011
SST: 09631-32020
2. INSTALL OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY Reassembly
3. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY Installation
4. INSTALL TRANSFER CASE LOWER PROTECTOR
(a) Install the 4 bolts and transfer case lower protector.
Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)
5. ADD TRANSFER OIL Adjustments
6. ADD AUTOMATIC TRANSMISSION FLUID Installation
7. INSPECT AUTOMATIC TRANSMISSION FLUID Installation
8. WARMING UP
9. DRIVE TEST