Installation

VF4BM TRANSFER: TRANSFER ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL TRANSFER ASSEMBLY





(a) Install the transfer to the automatic transmission.
(b) Install the 2 clamps and 8 bolts.
Torque: 24 Nm (245 kgf-cm, 18 ft-lbf)
2. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY
HINT: Installation

3. INSTALL TRANSFER CASE LOWER PROTECTOR





(a) Install the transfer case lower protector with the 4 bolts.
Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)
4. ADD TRANSFER OIL
5. ADD AUTOMATIC TRANSMISSION FLUID Installation
6. INSPECT AUTOMATIC TRANSMISSION FLUID Installation
7. INSPECT SHIFT LEVER POSITION Installation
8. CHECK FOR EXHAUST GAS LEAKAGE
9. WARM UP
10. DRIVE TEST