Removal

WIPER AND WASHER: REAR WIPER RUBBER: REMOVAL

REMOVAL

1. REMOVE REAR WIPER BLADE





(a) Raise the rear wiper blade to the position as shown in the illustration, to the extent that the meshing of the claw is disengaged with the click sound.
NOTE:
Be careful not to break the claw.

(b) Pull straight the rear wiper blade to vehicle's left from the wiper arm.
NOTE:
Do not fold the rear wiper arm with the rear wiper blade being removed from it.

2. REMOVE REAR WIPER RUBBER





(a) Place the rear wiper with the rear end of the rubber protruded from the blade stopper as shown in the illustration.
NOTE:
Do not pull out the wiper rubber forcibly. Otherwise the backing plates are deformed or blade claw is damaged.
HINT: Pushing the position close to the middle of the blade will raise the rubber, which could be easier to pull it out.