Reassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

REASSEMBLY

1. INSTALL NO. 2 METER HOOD RETAINER





(a) Install the No. 2 meter hood retainer with the 2 screws [F].
2. INSTALL NO. 1 METER HOOD RETAINER





(a) Install the No. 1 meter hood retainer with the 2 screws [F].
3. INSTALL NO. 1 INSTRUMENT PANEL PIN





(a) Install the 4 No. 1 instrument panel pins with the 4 screws [F].
4. INSTALL INSTRUMENT PANEL SPACER





(a) Install the instrument panel spacer.
5. INSTALL ENGINE SWITCH





(a) Engage the 2 claws to install the engine switch.
6. INSTALL AUTOMATIC LIGHT CONTROL SENSOR





(a) Engage the 2 claws to install the automatic light control sensor.
7. INSTALL DEFROSTER NOZZLE GARNISH





(a) Engage the 8 claws and 2 clips to install the defroster nozzle garnish.
8. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation
9. INSTALL NO. 2 INSTRUMENT PANEL WIRE





(a) Engage the 4 clamps.
(b) Connect the connector to install the No. 2 instrument panel wire.
10. INSTALL NAVIGATION ANTENNA (w/ Navigation System) Installation
11. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY Installation
12. INSTALL SIDE DEFROSTER NOZZLE





(a) Engage the 4 claws to install the side defroster nozzle.
13. INSTALL NO. 2 HEATER TO REGISTER DUCT





(a) Install the No. 2 heater to register duct with the 4 screws [F].
14. INSTALL DEFROSTER NOZZLE ASSEMBLY





(a) Install the defroster nozzle assembly with the 3 screws [F].
15. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT





(a) Install the side No. 2 defroster nozzle duct with the screw [F].
16. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT





(a) Install the side No. 1 defroster nozzle duct with the screw [F].
17. INSTALL NO. 3 HEATER TO REGISTER DUCT





(a) Install the No. 3 heater to register duct with the 3 screws [F].
18. INSTALL NO. 1 HEATER TO REGISTER DUCT





(a) Install the No. 1 heater to register duct with the 3 screws [F].