Tire Pressure Warning System Initialization

INITIALIZING THE TIRE PRESSURE WARNING SYSTEM

How To Initialize The Tire Pressure Warning System

To initialize the system, use the satellite switch.

1. Park the vehicle in safe place and turn the "ENGINE START STOP" switch OFF.

While the vehicle is moving, initialization is not performed.

2. Adjust the tire pressure to the specified cold tire inflation pressure level.

Make sure to adjust the tire pressure to the specified level. The tire inflation pressure warning system will operate based on this pressure level.

3. Turn the "ENGINE START STOP" switch to IGNITION ON mode.

4. The tire pressure initialization setting display
[1] Continue to press the "<" or ">" switch until the initialization setting display appears. It may take several minutes to complete the setting. Wait for several minutes before turning the engine switch OFF if necessary.

[2] Recording tire pressure settings
Press the "ON/OFF" button until the tire pressure warning light blinks slowly 3 times and the message "PRESSURE INITIAL" showing that the initial setting is complete is displayed on the multi-information display.

5. Wait for a few minutes with the IGNITION ON mode, and then turn the "ENGINE START STOP" switch to OFF.