Installation

NAVIGATION: NAVIGATION ECU: INSTALLATION

INSTALLATION

1. INSTALL DISC PLAYER BRACKET





(a) Install the disc player bracket with the 2 screws.
2. INSTALL NO. 2 DISC PLAYER BRACKET





(a) Install the No. 2 disc player bracket with the 2 screws.
3. INSTALL NAVIGATION ECU





(a) Install the navigation ECU with the 3 nuts.
(b) Connect each connector.
4. INSTALL DECK SIDE TRIM BOX LH
5. INSTALL DECK SIDE TRIM BOX RH
6. INSTALL REAR FLOOR FINISH PLATE
7. INSTALL DECK NO. 3 BOARD SUB-ASSEMBLY
8. INSTALL DECK NO. 2 BOARD SUB-ASSEMBLY
9. INSTALL DECK FLOOR BOX REAR
10. INSTALL DECK FLOOR BOX FRONT
11. INSTALL JACK CARRIER ASSEMBLY
12. INSTALL JACK ASSEMBLY
13. INSTALL JACK CARRIER SUPPORT
14. INSTALL TONNEAU COVER ASSEMBLY
15. INSTALL DECK BOARD SUB-ASSEMBLY
16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
17. PERFORM INITIALIZATION
NOTICE:
Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.