Installation

EXTERIOR: ROOF RACK: INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. INSTALL ROOF CARRIER SEAL
(a) Install 2 new roof carrier seals to the vehicle body.
2. INSTALL ROOF CARRIER CAP (w/ Sliding Roof)
(a) Install the roof carrier cap to the roof rack.
3. INSTALL ROOF RACK ASSEMBLY LH
(a) Clean the threaded surface on the vehicle body with a non-residue solvent.
(b) Install the roof rack with 4 new bolts.
Torque: 34 Nm (347 kgf-cm, 25ft-lbf)





4. INSTALL CENTER ROOF RACK SUPPORT SUB-ASSEMBLY (w/ Crossbar)




HINT: Use the same procedures to install the other roof rack support.

(a) Attach the 2 pins to install the roof rack support as shown in the illustration.





(b) Install the screw.
(c) Install the cushion.





5. INSTALL REAR ROOF RACK LEG COVER LH
(a) Attach the 2 guides, 2 claws and clip to install the cover.





6. INSTALL FRONT ROOF RACK LEG COVER LH
(a) Attach the 2 guides, 2 claws and clip to install the cover.