How to Proceed With Troubleshooting

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HOW TO PROCEED WITH TROUBLESHOOTING

1. Vehicle Brought to Workshop
NEXT -- Continue to next step.
2. Check and Clear DTCs and Freeze Frame Data
HINT:
Reading and Clearing Diagnostic Trouble Codes and Freeze Frame Data.

NEXT -- Continue to next step.
3. Problem Symptom Confirmation
-- Symptom does not occur: Go to step 5
-- Symptom occurs: Go to step 6
4. Symptom Simulation
NEXT -- Continue to next step.
5. DTC Check
HINT:
Reading and Clearing Diagnostic Trouble Codes.

-- There is no output: Go to step 6
-- There is output: Go to step 7
6. Problem Symptoms Table
HINT:
Problem Symptoms Table.

-- Check for fluid leakage and Go to step 10
7. DTC Chart
HINT:
Vehicle Stability Control System.

NEXT -- Continue to next step.
8. Circuit Inspection
NEXT -- Continue to next step.
9. Identification of Problem
NEXT -- Continue to next step.
10. Repair
NEXT -- Continue to next step.
11. Confirmation Test
NEXT -- End