Installation

LIGHTING: HEADLIGHT DIMMER SWITCH: INSTALLATION

INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH





(a) Install the headlight dimmer switch as shown in the illustration.





(b) Install the headlight dimmer switch with the claw and the clamp.
(c) Connect the connector.
2. INSTALL WIPER SWITCH
3. INSTALL SPIRAL CABLE Installation
4. INSTALL STEERING COLUMN COVER (for Manual Tilt) Installation
5. INSTALL STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column) Installation
6. ADJUST SPIRAL CABLE Installation
7. INSTALL STEERING WHEEL ASSEMBLY (for Manual Tilt) Installation
8. INSTALL STEERING WHEEL ASSEMBLY (for Power Tilt and Power Telescopic Steering Column) Installation
9. INSPECT STEERING WHEEL CENTER POINT
10. INSTALL STEERING PAD Installation
11. INSTALL STEERING WHEEL NO. 2 COVER LOWER Installation
12. INSTALL STEERING WHEEL NO. 3 COVER LOWER Installation
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. INSPECT STEERING PAD Installation
15. PERFORM INITIALIZATION
NOTICE:
Some systems need initialization when disconnecting the cable from the negative battery terminal.

16. INSPECT SUPPLEMENTAL RESTRAINT SYSTEM WARNING LIGHT
Installation