Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT SEAT SIDE AIRBAG ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY
CAUTION:
- The nuts must not be reused.
- Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.





(a) Install the front seat side airbag assembly with the 2 new nuts.
Torque: 5.5 Nm (56 kgf-cm, 49in-lbf)
(b) Engage the clamp to connect the wire harness.





(c) Engage the 5 clamps to connect the wire harness.
2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD Reassembly
3. INSTALL FRONT SEAT HEADREST SUPPORT
4. INSTALL FRONT SEAT HEADREST SUPPORT
5. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY
6. INSTALL SEAT ARMREST ASSEMBLY Reassembly
7. INSTALL SEAT ARMREST COVER
8. INSTALL FRONT SEAT HEADREST ASSEMBLY
9. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY
10. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
11. INSTALL RECLINING POWER SEAT SWITCH KNOB
12. INSTALL FRONT SEAT ASSEMBLY Installation
13. INSTALL SEAT TRACK COVER RH
14. INSTALL SEAT TRACK COVER LH
15. INSTALL SEAT TRACK BRACKET COVER INNER FRONT LH
16. INSTALL SEAT TRACK BRACKET COVER OUTER FRONT LH
17. PERFORM INITIALIZATION Installation
18. CHECK POWER SEAT FUNCTION On-Vehicle Inspection
19. INSPECT SEAT HEATER OPERATION
20. INSPECT SRS WARNING LIGHT
Diagnosis System