Installation

BRAKE CONTROL: STEERING ANGLE SENSOR: INSTALLATION

INSTALLATION

1. INSTALL STEERING ANGLE SENSOR





(a) Install the steering angle sensor to the spiral cable.
- Install the claw securely.
- Do not damage the claw.

2. ADJUST CENTER FRONT WHEEL
3. INSTALL SPIRAL CABLE Installation
4. ADJUST SPIRAL CABLE Installation
5. INSTALL STEERING WHEEL ASSEMBLY (for Manual Tilt) Installation
6. INSTALL STEERING WHEEL ASSEMBLY (for Power Tilt and Power Telescopic Steering Column) Installation
7. INSTALL STEERING PAD Installation
8. INSPECT STEERING WHEEL CENTER POINT
9. INSPECT STEERING PAD Installation
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

11. INSPECT SRS WARNING LIGHT
HINT:
Diagnosis System

12. INSPECT ABS WARNING LIGHT AND VSC WARNING LIGHT
HINT:
Test Mode Procedure