Installation

SUSPENSION CONTROL: PNEUMATIC TANK WITH TUBE: INSTALLATION

INSTALLATION

1. INSTALL PNEUMATIC W/TUBE TANK ASSEMBLY





(a) Align the matchmark holes on the pneumatic w/ tube tank assembly with the proper positions, and install it to the body with 3 bolts.
Torque: 29 Nm (296 kgf-cm, 21ft-lbf)
(b) Coat 2 new O-rings and a new plate with MP grease.
(c) Install the 2 O-rings and the plate onto the height control tube No. 2.
HINT:
- For the removal procedure of the (type 2) tube, refer to PRECAUTION of SUSPENSION CONTROL SYSTEM Suspension Control System.
- When the pneumatic w/ tube tank assembly is replaced with a new one, it does not require a new O-ring.





(d) Connect the tube and the connector to the pneumatic w/ tube tank assembly.





(e) Install the height control tank cover with the 3 clips.





(f) Install the 4 clamps.
2. INSPECT AIR LEAK