Removal

SUSPENSION CONTROL: HEIGHT CONTROL COMPRESSOR: REMOVAL

REMOVAL
NOTICE:
Before disconnecting the air tube, press the height control OFF switch to stop the vehicle height control operation.

1. REMOVE HEIGHT CONTROL COMPRESSOR COVER
(a) Remove the 2 screws, the bolt, the clip and the height control compressor cover.
2. DISCONNECT HEIGHT CONTROL TUBE NO.2





(a) Remove the clip and holder.
(b) Disconnect the height control tube No. 2 from the 2 way cap.
HINT: For the disconnecting procedure of the (type 3) tube, refer to PRECAUTION of SUSPENSION CONTROL SYSTEM Suspension Control System.

3. REMOVE REAR HEIGHT CONTROL COMPRESSOR BRACKET





(a) Remove the 3 clamps and disconnect the 2 connectors and wire harness.





(b) Remove the clamp.
(c) Disconnect the hose from the cap grommet.





(d) Remove the 3 bolts.





(e) Slide the rear height control compressor bracket to the front of the vehicle, and release the claws A and B from the height control compressor bracket.
(f) Remove the rear height control compressor w/ bracket assembly.
4. REMOVE HEIGHT CONTROL FILTER
(a) Remove the clamp, 2 clips and 2 hoses.
(b) Remove the height control filter.
5. REMOVE REAR HEIGHT CONTROL COMPRESSOR BRACKET





(a) Remove the 3 clamps.
(b) Remove the 3 bolts and the 3 height control compressor bush No. 2 from the rear height control compressor bracket.
6. REMOVE HEIGHT CONTROL DRYER ASSEMBLY





(a) Remove the clip and holder.
(b) Remove the height control tube No. 2 from the height control dryer assembly.





(c) Remove the bolt and the height control dryer assembly from the height control compressor assembly.
7. REMOVE HEIGHT CONTROL COMPRESSOR ASSEMBLY





(a) Remove the O-ring.
HINT: When the height control compressor assembly is replaced with a new one, it doesn't require a new O-ring.