Removal

SUSPENSION CONTROL: HEIGHT CONTROL VALVE: REMOVAL

REMOVAL
NOTICE:
- Before replacement, press the height control OFF switch to stop the vehicle height control operation.
- Be careful that the vehicle body lowers because the air in the pneumatic cylinder is discharged by disconnecting the pneumatic cylinder side air tube of the height control valve.
- This operation takes out the air from the front shock absorber, therefore never rotate the lower part of the absorber by turning the steering wheel etc.

1. REMOVE ENGINE UNDER COVER NO.1
2. SEPARATE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
3. SEPARATE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
4. REMOVE FRONT BUMPER COVER
5. REMOVE HEIGHT CONTROL VALVE SUB-ASSEMBLY NO.1





(a) Disconnect the connector.





(b) Disconnect the 3 height control tubes.
HINT: For the removal procedure of the (type 3) tube, refer to PRECAUTION OF SUSPENSION CONTROL SYSTEM Suspension Control System.

(c) Remove the 2 nuts and the height control valve sub-assembly No.1.
6. REMOVE HEIGHT CONTROL VALVE SUB-ASSEMBLY NO.2
(a) Disconnect the connector.





(b) Using SST, disconnect the 3 height control tubes.
SST: 09730-00010
HINT: For the disconnecting procedure of the (type 2) tube, refer to PRECAUTION OF SUSPENSION CONTROL SYSTEM Suspension Control System





(c) Disconnect the height control tube.
HINT: For the disconnecting procedure of the (type 3) tube, refer to PRECAUTION OF SUSPENSION CONTROL SYSTEM Suspension Control System.





(d) Remove the 2 nuts and the height control valve sub-assembly No.2.