Removal

U151E AUTOMATIC TRANSAXLE: SHIFT LEVER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY





(a) Turn the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.
3. REMOVE CONSOLE PANEL UPPER FRONT Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER Removal
5. REMOVE FRONT DOOR SCUFF PLATE LH Removal
6. REMOVE FRONT DOOR SCUFF PLATE RH Removal
7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal
8. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal
9. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER Removal
10. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2 Removal
11. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal
12. REMOVE FLOOR CARPET COVER CENTER LH Removal
13. REMOVE FLOOR CARPET COVER CENTER RH Removal
14. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER Removal
15. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY





(a) Using a screwdriver, disconnect the cable end from the shift lever assembly.
(b) Turn the socket of the transmission control cable assembly counterclockwise and remove the stopper cap.
(c) Disconnect the transmission control cable assembly from the shift lever assembly.
16. REMOVE SHIFT LEVER ASSEMBLY





(a) Disconnect the pattern select switch connector, the shift rock control computer connector, and the indicator light wire connector.





(b) Remove the 4 nuts and disconnect the shift lever assembly from the vehicle.