Installation

U151E AUTOMATIC TRANSAXLE: AIR COOLED OIL COOLER: INSTALLATION

INSTALLATION

1. INSTALL OIL WITH HOSE COOLER ASSEMBLY





(a) Temporarily install the oil with hose cooler assembly with the bolt and nut.
(b) Tighten the bolt and nut in the sequence shown in the illustration.
for TMC Made - Torque: 6.0 Nm (61 kgf-cm, 53in-lbf)
for TMMK Made - Torque: 7.0 Nm (71 kgf-cm, 62in-lbf)
HINT: After temporarily tightening the bolt, fully tighten the nut, and then the bolt.

(c) Connect the 2 oil cooler hoses.
2. INSTALL FRONT BUMPER COVER
HINT:
Installation

3. ADD AUTOMATIC TRANSAXLE FLUID
4. INSPECT AUTOMATIC TRANSAXLE FLUID U151F Automatic Transaxle
5. INSTALL NO. 1 ENGINE UNDER COVER