Removal

DRIVE SHAFT: REAR DRIVE SHAFT (for TMMC Made 4WD): REMOVAL

REMOVAL

1. REMOVE REAR WHEEL
2. SEPARATE REAR SPEED SENSOR Removal
3. REMOVE REAR AXLE SHAFT NUT Removal
4. SEPARATE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (w/ Air Suspension) Removal
5. SEPARATE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (w/ HID Headlight System) Removal
6. SEPARATE NO. 1 REAR SUSPENSION ARM ASSEMBLY Removal
7. SEPARATE REAR STRUT ROD ASSEMBLY Removal
8. SEPARATE NO. 2 REAR SUSPENSION ARM ASSEMBLY Removal
9. REMOVE REAR AXLE CARRIER SUB-ASSEMBLY Removal
10. REMOVE REAR DRIVE SHAFT ASSEMBLY





(a) Remove the rear drive shaft as shown in the illustration.
NOTICE:
Move the drive shaft assembly while keeping it level.

11. INSPECT REAR DRIVE SHAFT ASSEMBLY Rear Drive Shaft (for TMMC Made 4WD)