Installation

MF2AV TRANSFER: EXTENSION HOUSING OIL SEAL: INSTALLATION

INSTALLATION

1. INSTALL TRANSFER EXTENSION HOUSING TYPE T OIL SEAL





(a) Using SST(s), install anew transfer extension housing type T oil seal to he transfer extension housing sub-assembly at the position show in the illustration.
SST: 09325-20010
NOTICE:
Do not install the oil seal obliquely.

(b) Apply small amount of MP grease to the oil seal lip.
2. INSTALL PROPELLER W/CENTER BEARING SHAFT ASSEMBLY
HINT:
Installation

3. INSTALL EXHAUST PIPE ASSEMBLY
HINT:
Installation

4. INSTALL TRANSFER DRAIN PLUG Installation
5. INSTALL TRANSFER CASE NO. 1 PLUG Installation
6. CHECK FOR EXHAUST GAS LEAK