Driver Side Seat Belt Warning Light Does Not Operate

SEAT BELT: SEAT BELT WARNING SYSTEM: Driver Side Seat Belt Warning Light does not Operate

Driver Side Seat Belt Warning Light does not Operate

DESCRIPTION

When turning the ignition switch ON, the combination meter assembly communicates with the supplemental restraint system by the multiplex communication system. Unless the driver side seat belt is fastened, the combination meter assembly will turn on the seat belt warning light for driver side. If the driver side seat belt is fastened, then the combination meter assembly will turn off the driver side seat belt warning light.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. PERFORM ACTIVE TEST USING TECHSTREAM
(a) Operate the Techstream according to the steps on the display and select "Active Test".
Combination Meter:






OK:
Switch condition (ON/OFF) can be switched by "Active Test".
NG -- GO TO COMBINATION METER SYSTEM
OK -- Continue to next step.
2. CHECK DTCs
HINT:
DTC Check / Clear
(a) Check DTCs.






B -- GO TO GO TO AIRBAG SYSTEM
A -- REPLACE AIR BAG SENSOR ASSEMBLY CENTER