Installation

AXLE: REAR AXLE HUB AND BEARING (for 2WD): INSTALLATION

INSTALLATION

1. INSTALL REAR AXLE HUB & BEARING ASSEMBLY LH





(a) Install the hub & bearing assembly LH with the 4 bolts.
Torque: 75 Nm (765 kgf-cm, 55ft-lbf)
2. INSPECT BEARING BACKLASH Rear Axle Hub and Bearing
3. INSPECT AXLE HUB DEVIATION Rear Axle Hub and Bearing
4. CONNECT SKID CONTROL SENSOR
(a) Connect the connector.
NOTICE:
Do not twist the sensor wire when connecting it.

5. INSTALL REAR DISC
6. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH





(a) Install the rear disc brake caliper with the 2 bolts.
Torque: 78 Nm (800 kgf-cm, 58ft-lbf)





(b) Install the bolt with flexible hose to the shock absorber.
Torque: 19 Nm (192 kgf-cm, 14ft-lbf)
7. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76ft-lbf)
8. ADJUST REAR WHEEL ALIGNMENT
(a) Inspect rear wheel alignment Rear Wheel Alignment.
9. ADJUST HEADLIGHT AIM ONLY
HINT:
Adjustments

10. CHECK ABS SPEED SENSOR SIGNAL
(a) Check ABS speed sensor signal Test Mode Procedure.