Lighting (EXT)

LIGHTING (EXT): LIGHTING SYSTEM: B124D,B2432: Lost Communication with AFS LIN
B124D - Lost Communication with AFS LIN
B2432 - Lost Communication with Automatic High Beam Sensor

DESCRIPTION

* DTC B124D is stored when the main body ECU detects malfunctions in the LIN communication system.

* DTC B2432 is stored when the headlight swivel ECU detects malfunctions in the LIN communication system.





WIRING DIAGRAM





INSPECTION PROCEDURE

NOTICE:
First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this symptom.

PROCEDURE

1. CHECK FOR DTC

(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.

(b) Check for DTCs Reading and Clearing Diagnostic Trouble Codes.

OK:

DTC B124D is not output.

NG -- CHECK HARNESS AND CONNECTOR (HEADLIGHT SWIVEL ECU ASSEMBLY - INNER REAR VIEW MIRROR ASSEMBLY)

OK -- USE SIMULATION METHOD TO CHECK How To Proceed With Troubleshooting

2. CHECK HARNESS AND CONNECTOR (HEADLIGHT SWIVEL ECU ASSEMBLY - INNER REAR VIEW MIRROR ASSEMBLY)

(a) Disconnect the A46 headlight swivel ECU connector.

(b) Disconnect the W5 inner rear view mirror connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

3. CHECK INNER REAR VIEW MIRROR ASSEMBLY (OPERATION)

(a) Temporarily replace the inner rear view mirror with a new or normally functioning one Removal.

(b) Check for DTCs Reading and Clearing Diagnostic Trouble Codes.

OK:

DTC B124D or B2432 is not output.

NG -- REPLACE HEADLIGHT SWIVEL ECU ASSEMBLY

OK -- END (REPLACE INNER REAR VIEW MIRROR ASSEMBLY) Removal