Installation

SEAT: SEAT HEATER SWITCH (for Rear): ON-VEHICLE INSPECTION

1. REMOVE NO. 2 AIR CONDITIONING CONTROL ASSEMBLY

(a) Disconnect the No. 2 air conditioning control assembly connector.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





(d) If the result is not as specified, repair or replace the wire harness or connector.

(e) Connect the No. 2 air conditioning control assembly connector.





(f) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





Text in Illustration





(g) If the result is not as specified, replace the No. 2 air conditioning control assembly.