Installation

HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: INSTALLATION

1. INSTALL NO. 1 PRESSURE SWITCH

(a) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 1 pressure switch.

Compressor oil:

ND-OIL 8 or equivalent

(b) Install the O-ring to the No. 1 pressure switch.

(c) Install the No. 1 pressure switch.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)

(d) Connect the connector.

2. INSTALL AIR CONDITIONING PRESSURE SENSOR

(a) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the air conditioning pressure sensor.

Compressor oil:

ND-OIL 8 or equivalent

(b) Install the O-ring to the air conditioning pressure sensor.

(c) Install the air conditioning pressure sensor.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)

(d) Connect the connector.

3. CHARGE REFRIGERANT Service and Repair

4. WARM UP ENGINE Service and Repair

5. CHECK FOR REFRIGERANT GAS LEAK Service and Repair

6. INSTALL RADIATOR GRILLE

(a) Install the radiator grille Installation.

7. INSTALL UPPER RADIATOR SUPPORT SEAL Installation