Service Data

SPECIFICATIONS: ALIGNMENT / HANDLING DIAGNOSIS: SERVICE DATA



Standard Camber Inclination (Unloaded Vehicle)





Standard Caster Inclination (Unloaded Vehicle)





Standard Steering Axis Inclination (Unloaded Vehicle)





Standard Toe-in (Unloaded Vehicle)





Standard Wheel Turning Angle (Unloaded Vehicle)






Standard Vehicle Height (Unloaded Vehicle)






MEASURE VEHICLE HEIGHT





NOTICE:
Before inspecting the wheel alignment, adjust the vehicle height to the specification.

(a) Press down on the vehicle several times to stabilize the suspension, and then measure the vehicle height.

Text in Illustration





Measuring points:

A
Ground clearance of the center of the front wheel

B
Ground clearance of the center of the front adjusting cam bolt

C
Ground clearance of the center of the rear wheel

D
Ground clearance of the center of the rear lower control arm front side

(b) If the vehicle height is not as specified, adjust the height by pressing down on the vehicle several times to stabilize the suspension.