Installation

DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH: INSTALLATION

1. INSTALL FRONT DOOR OUTSIDE HANDLE SUB-ASSEMBLY

(a) Insert the front end of the front door outside handle sub-assembly in to the front door out side handle frame.





(b) Insert the rear end of the front door outside handle assembly into the front door outside handle frame. Next slide the front door outside handle assembly to the front of the vehicle to install it.

(c) Using a "torx" socket wrench (T30), install the front door outside handle sub-assembly with the screw.





(d) Connect the connector.

2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER Reassembly

3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY Reassembly

4. INSTALL FRONT DOOR SERVICE HOLE COVER Reassembly

5. INSTALL FRONT DOOR TRIM COVER Reassembly

6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Reassembly

7. INSTALL COURTESY LIGHT ASSEMBLY Reassembly

8. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Reassembly

9. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG Reassembly