ACN Call End

CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: ACN CALL END

1. ACN CALL END

This function terminates the ACN (Automatic Collision Notification) to the telematics provider. After a collision in which the DCM receives "Collision Detection Signal", the vehicle will send the emergency call notification to the telematics provider until the ACN call end utility has been run. Use the ACN Call End utility to stop the ACN call.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Choose "Telematics" from the System Selection Menu, and then click "Utility".

(e) Click "DCM Service" on the Utility Selection Menu.

(f) Choose "ACN call end" and then click "Next" on the DCM Service Utility.





(g) Follow the instructions on the Techstream.