Reassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

1. INSTALL NO. 2 METER HOOD RETAINER

(a) Install the No. 2 meter hood retainer with the 2 screws [F].





2. INSTALL NO. 1 METER HOOD RETAINER

(a) Install the No. 1 meter hood retainer with the 2 screws [F].





3. INSTALL NO. 1 INSTRUMENT PANEL PIN

(a) Install the 4 No. 1 instrument panel pins with the 4 screws [F].





4. INSTALL INSTRUMENT PANEL SPACER

(a) Install the instrument panel spacer.





5. INSTALL ENGINE SWITCH

(a) Engage the 2 claws to install the engine switch.





6. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

(a) Engage the 2 claws to install the automatic light control sensor.





7. INSTALL DEFROSTER NOZZLE GARNISH

(a) Engage the 8 claws and 2 clips to install the defroster nozzle garnish.





8. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation

9. INSTALL NO. 2 INSTRUMENT PANEL WIRE

(a) Engage the 4 clamps.





(b) Connect the connector to install the No. 2 instrument panel wire.

10. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) Installation

11. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/o Satellite Radio) Installation

12. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/ Satellite Radio) Installation

13. INSTALL SIDE DEFROSTER NOZZLE

(a) Engage the 4 claws to install the side defroster nozzle.





14. INSTALL NO. 2 HEATER TO REGISTER DUCT

(a) Install the No. 2 heater to register duct with the 4 screws [F].





15. INSTALL DEFROSTER NOZZLE ASSEMBLY

(a) Install the defroster nozzle assembly with the 3 screws [F].





16. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT

(a) Install the side No. 2 defroster nozzle duct with the screw [F].





17. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT

(a) Install the side No. 1 defroster nozzle duct with the screw [F].





18. INSTALL NO. 3 HEATER TO REGISTER DUCT

(a) Install the No. 3 heater to register duct with the 3 screws [F].





19. INSTALL NO. 1 HEATER TO REGISTER DUCT

(a) Install the No. 1 heater to register duct with the 3 screws [F].