Rear Seat Outer Belt Assembly

SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: ON-VEHICLE INSPECTION

CAUTION:
Be sure to follow the correct removal and installation procedures of the rear seat 3 point type inner belt assembly.

1. INSPECT REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY (for Vehicle not Involved in Collision)

(a) Perform a diagnostic system check DTC Check / Clear.

(b) Visually check for defects with the rear seat 3 point type inner belt assembly installed on the vehicle.

(1) The defects are as follows:

* Cuts on the rear seat 3 point type inner belt assembly

* Small cracks on the rear seat 3 point type inner belt assembly

* Significant discoloration on the rear seat 3 point type inner belt assembly

OK:

No defects are found.

HINT
If any of the defects is found, replace the rear seat 3 point type inner belt assembly with a new one.

2. INSPECT REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

(a) Perform a diagnostic system check DTC Check / Clear.

(b) Visually check for defects with the rear seat 3 point type inner belt assembly removed from the vehicle.

(1) The defects are as follows:

* Cuts on the rear seat 3 point type inner belt assembly

* Small cracks on the rear seat 3 point type inner belt assembly

* Significant discoloration on the rear seat 3 point type inner belt assembly

* Cracks or other damage to the connector

OK:

No defects are found.

HINT
If any of the defects is found, replace the rear seat 3 point type inner belt assembly with a new one.