Removal
MIRROR: INNER REAR VIEW MIRROR: REMOVAL
1. REMOVE MAP LIGHT ASSEMBLY Removal
2. REMOVE RAIN SENSOR COVER (w/o Lane Keeping Assist System)
(a) Pull the stopper in the direction shown in the illustration.
(b) Detach the 2 claws and remove the rain sensor cover.
3. REMOVE RAIN SENSOR COVER (w/ Lane Keeping Assist System)
NOTICE:
When removing and installing the rain sensor cover, do not apply force to the object recognition camera areas labeled "X".
NOTICE:
* Do not touch of the camera lens (built into the inner rear view mirror assembly) with a bare hand.
* Do not allow anything to adhere to the camera lens (built into the inner rear view mirror assembly).
* Do not apply strong impact to the inner rear view mirror assembly.
* Do not allow any liquids to get on the inner rear view mirror assembly.
(a) Pull the stopper in the direction shown in the illustration.
(b) While being careful not to apply force to the camera area, detach the 2 clips and 2 claws and remove the rain sensor cover.
4. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o Automatic High Beam System)
(a) Disconnect the connector.
(b) Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror.
5. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ Automatic High Beam System)
NOTICE:
* Do not touch of the camera lens (built into the inner rear view mirror assembly) with a bare hand.
* Do not allow anything to adhere to the camera lens (built into the inner rear view mirror assembly).
* Do not apply strong impact to the inner rear view mirror assembly.
* Do not allow any liquids to get on the inner rear view mirror assembly.
(a) Disconnect the connector.
(b) Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror.