Removal

MIRROR: OUTER REAR VIEW MIRROR: REMOVAL

HINT
* Use the same procedures for the LH side and RH side.
* The procedures listed below are for the LH side.
1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System (for HDD):
* After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.
3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Removal

4. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Removal

5. REMOVE DOOR FRAME GARNISH Removal

6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Removal

7. REMOVE MULTIPLEX NETWORK FRONT DOOR ECU Removal

8. REMOVE FRONT NO. 2 DOOR SERVICE HOLE COVER Removal

9. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY





(a) Disconnect the connector.

(b) Detach the 3 clamps.

(c) Remove the 3 nuts and mirror.